Welcome to Boss Reviews!

Home tools Buyer's Guides from tech enthusiast who loves technology and clever solutions for better living.

Check Today Price

Best cornhole boards 2018 – [Buyer’s Guide]

Last Updated December 1, 2018
Share on Facebook0Share on Google+0Pin on Pinterest0Share on StumbleUpon0Tweet about this on Twitter

Willard LawsonHey friends! I’ve got something important to talk about today! After putting in 53+ hours of research and testing, I made a list of the best cornhole boards of 2018 and explained their differences and advantages.

I have been writing about technology and entertainment since the early 90s from my secluded home in West Virginia. In this section we provide our readers with a comparison table of our top picks. Scroll past the table for a closer look at each of the 3 best cornhole boards in our review section.

Best cornhole boards of 2018

I must say I am quite a fan of cornhole boards, so when the question “What are the best cornhole boards available on the market?” came to my mind, I excitedly started gathering information together with personal experience to write this article in the hope that it may help you find the suitable cornhole boards. You can make a choice based on the my list as you shop.

I browse the various cornhole boards available on the market and list three of the very best. Not all cornhole boards are created equal though.

Test Results and Ratings

Rank №1 №2 №3
Product
Total 4.8 4.5 4.3
Design
5 points
4 points
4 points
Versatility
4 points
5 points
4 points
Performance
5 points
5 points
4 points
Price
5 points
4 points
5 points
Awards 1
button button button
banner banner banner

 

 

 

 

How to save up to 86%? Here is little trick.

You must visit the page of sales. Here is the link. If you don’t care about which brand is better, then you can choose the cornhole boards by the price and buy from the one who will offer the greatest discount.

 

 

№1 – College Colors Cornhole Boards – Cornhole Crew – ACA Regulation Size Cornhole Board Set

 
College Colors Cornhole Boards - Cornhole Crew - ACA Regulation Size Cornhole Board Set

Pros
American Cornhole Association (ACA) Regulation Size boards
Folding legs for easy transport and storage
Includes 8 top of the line ACA bean bags
Cons
I didn’t notice a single drawback yet
 
Total:
4.8

Why did this cornhole boards win the first place?

I don’t know anything about other models from this brand, but I am fully satisfied with this product. The material is stylish, but it smells for the first couple of days. I really enjoy the design. It is compact, comfortable and reliable. And it looks amazing! I am very happy with the purchase. It is definitely worth its money. The product is top-notch!

banner2


Design
5

5star

Versatility
4

4star

Performance
5

5star

Price
5

5star

 

 

№2 – OOFIT Premium Solid Wood Cornhole Game Set with Stylish

 
OOFIT Premium Solid Wood Cornhole Game Set with Stylish

Pros
NO MORE TROUBLE of BAGS BOUNCING: Our cornhole sets with premium construction design are made from 100% solid wood: cabinet graded birch plywood tops and strong hardwood frames, highest handcraft skills. Not the cheap stuff like MDF, cardpress etc,. many other dealers use. It is exactly very heavy duty and stable with the two strong legs support, and the boards will not sway or bounce when the bags hit them
Cons
A bit high price.
Can be tedious to clean up.
 
Total:
4.5

Why did this cornhole boards come in second place?

The design quality is top notch and the color is nice. I recommend you to consider buying this model, it definitely worth its money. I really liked it. It is amazing in every aspect. It did even exceed my expectations for a bit, considering the affordable price. The material is pretty strong and easy to wash if needed.

banner2


Design
4

4star

Versatility
5

5star

Performance
5

5star

Price
4

4star

 

 

№3 – GoSports Solid Wood Premium Cornhole Set

 
GoSports Solid Wood Premium Cornhole Set

Pros
100% SOLID WOOD: Premium craftsmanship boards, varnished surface (easily painted or customized) made using pine wood frames and featuring mitered corner joints. Boards are also 100% ready to use without additional work required.
OFFICIAL TOURNAMENT SIZE: Full cornhole set includes 2 American Cornhole Association regulation size (4 feet x 2 feet) cornhole boards for authentic gameplay, 8 all-weather regulation bean bags, and rules
Cons
Pretty costly.
Not suited for novices.
 
Total:
4.3

Why did this cornhole boards take third place?

It is inconvenient to use due to the size. I am going to get something different next time. It doesn’t squeaks nor bents. Looks great in my apartment. I liked the design. We’ve been using it for 2 months and it still looks like brand new. A very convenient model. It is affordable and made of high-quality materials.

banner2


Design
4

4star

Versatility
4

4star

Performance
4

4star

Price
5

5star

 

 

cornhole boards Buyer’s Guide

If you keep the before points in mind, you can easily go out to the market and buy cornhole boards, right? No!

Choosing Cornhole Bags

If you get a decent set of cornhole boards from a reputable company, they should come with a full set of cornhole bags. Sometimes there are sets that are sold a la carte so the buyer can control the cost, just like this Do-It-Yourself Set.

By the way, I always think it’s important for the buyer to be in control, words I live by.

Believe it or not, cornhole bags come in a few different variations, and it’s important to understand what each style provides, and if it’s important to you or not. I love the new pro style bags that are all the rave but not everyone wants to pay the premium price tag for them. They are generally twice the cost of a set of corn-filled bags but I’ll tell you what, you will have to replace the corn filled bags or times before you replace your pro bags. The old saying applies… you get what you pay for.

Don’t get me wrong, I’m not bearish on corn-filled bags either. I’ve played more games in my life with these classic bags than any other type of bag. Once again, if you purchase from a good company, your classic bags will be worth every penny.

Court Setup

First things first. We have to set up the court. This is done by placing a board on a flat surface. Then measure off 27’ and place the other board directly across from the first one. This measurement should be from front end to front end. That’s it for the cornhole boards.

Teams or Singles

You can play this game with teams (vs. 2) or singles. If you’re playing teams then you stand at one end of the court next to the boards, and your teammate stands directly across from you on the other end of the court so you are looking straight at your teammate. The other team is on the opposite sides of the boards. If you are playing singles, then you will walk from one end of the court to the other after each inning.

Tossing Cornhole Bags

Here’s where the competition begins. When playing teams, each team gets four bags. All bags start on one side of the court. You will alternate tossing the bags against your opponent. You can decide who will throw first by flipping a coin. Now it’s time to get started. You throw, then your opponent throws until all bags have made it to the other end of the court. Then the other side will pitch them back in the same alternating fashion. If you’re playing singles, you will walk from end to end after each inning.

How To Score

Scoring is pretty simple. You will use a cancellation scoring system. You get point for landing the bag on the board (called a woody) and points for getting it in the hole (a cornhole). After all bags have been thrown you take the net score to see who actually get points. First team to 2wins.

Tools you need

Here is a list of tools that we are going to use for this project. However not every tool from this list is necessary, but the more power tools you have the better.

Keep an eye on anybody who is cutting the wood. Make sure that dimensions are exactly as recommended by American Cornhole Association.

Supplies you need

These supplies can be bought at almost any hardware or tool store, including Home Depot.

As you probably already know, the more quantity you buy the cheaper a material is per inch. So consider buying supplies for or more boards at once, this will lower the cost per board.

Make sure to choose excellent lumber and plywood without any defects on it. You want to have perfectly smooth board surface.

Building the frame

Now that you have prepared the wood, its time to construct the frame.

To connect the woods use wood screws with dimension of ½ inches. You can use clamps to hold the frame all together while you are connecting each wood part wit screws.

Cutting the hole

First, you need to precisely mark where you are going to cut the hole.

The center of the hole should be inches from the top and 1inches from each (left and right) side of the board edges. Use pencil to mark the hole center.

Use compass to draw the hole circle. It should be inches in diameter.

Now the fun part! Its time to cut the hole. Please, be very careful and take your time for this task.

First, create a small hole using your biggest drill. This will be your starting point for hole cutting. The hole should be somewhere on the hole circle line.

The legs have two main goals

First you need to prepare the legs for bolts. Using pencil mark the spot where bolt is going to pass through.

Simply turn the board upside down and place the leg where it is supposed to be. About inches from the top side.

Mark where the bolt is going to pass through. Make sure to mark both the legs and side frame.

Use compass to create half circle at the top side of the legs. This will ensure legs to move and to be folded.

Create the holes using drill.

Cut out the half circle part that you previously marked with compass. The cut is probably not going to be perfect, so use sandpaper to perfect the edges.

Using washer, bolt and nut, attach the legs to the board frame. Once attached the legs should be freely movable without any difficulties. If its hard to move the legs, then find out what is causing the problem.

Now its time to cut the legs so that when they are extended the back side of the board should be 1inches high.

Place the board on a table and extend the legs (legs should be hanging off the table). Under the board place something that is going to hold the whole board construction at 1inches height.

Cut the legs exactly in the place where table intersects with legs while the board is supported by 1inch object underneath.

Make it smooth

Next, you need to sand the wood using medium sandpaper. This will ensure smooth playing surface without any thorns that might damage cornhole bags.

Make sure to sand every part of cornhole board, especially sharp edges and spots where parts, such as legs, connect.

Sand down every discrepancies! Make it perfectly smooth! Keep an eye on parts where different wood types connect.

Material

Regulated by ACA, the material of the board should be made from standard plywood to guarantee minimal bounces and slips while playing. Although there are other types of materials such as metal and plastic, they’re discouraged because these materials might change the gameplay experience.

Paint requirements

All boards should be covered with a latex paint that allows the bags to slide up the board’s surface with ease. Besides, the preferred color is the white, especially in professional matches. Of course, you also pain it with different colors but make sure they are easy to see.

Slick Woody’s Burnt Wood Cornhole Set

If you have a pocket clicking with plenty of money, try noticing the Slick Woody’s Burnt Wood Cornhole Set.

This unit is not only rated at the number of the best cornhole boards for 201by Ezvid Wiki but also follows all the requirements from ACA. It’s made of Baltic Birch plywood for a smooth and solid playing surface. In addition, the frames are made of Poplar hardwood that brings a sturdy construction.

One of the most fulfilling parts of creating your own cornhole sets is the design. You’ve already put in a lot of time and work to make the set, now you want to make sure it looks great so you can show it off to your friends. Before you get ready to prime and paint it, you must do some prep work.

Since the boards are made out of plywood, we need to get a nice base for our paint. The first step in the process is put primer on everything. I used a Rustoleum primer that sticks to anything. This is important to give your paint a solid surface to stick to. This process should be a very quick part, since you don’t have to worry about making it look perfect. One warning is that primer is nearly impossible to get off of anything (including yourself). I used a super cheap sponge brush to apply the primer so I could just toss it in the trash afterwards. DO NOT use a quality brush, as it will be ruined once this process is finished. This part doesn’t need to look great; just make sure all the wood is covered.

Our painted cornhole boards are our most popular set. Choose from over 1different colors and get your bag toss set today.

See More from Cornhole Bag Toss

Believe it or not, the biggest key to getting plywood cut correctly is your attitude. Keep in mind, the associate who will be “operating” the saw doesn’t want to do it. They are usually understaffed, have a long work list, and have just cleaned up a mess that a rude customer left for them. And now, you show up. Everyday they get customers who try to monopolize their time, aren’t prepared with dimensions, demand perfection, insist that cuts be made beyond the scope or limitations of the equipment, or fall outside the boundaries of company policy. Be respectful from the start and the end result will be better than expected. Taking the time to prepare and establish a relationship with the associate cutting your plywood will more than pay for itself down the road.

On the other hand, this same associate “can and will” make perfect cuts, not charge you extra for extra cuts, and in some cases, offer you a “discount” on your material. It’s all about the approach.

Steps to Perfection

The steps listed below are actually quite simple and very easy to implement. My most recent experience reaffirms that the process works. For example, I am in the process of building Cornhole games for family and friends as gifts and for profit. I use good ¾ inch thick cabinet grade plywood which is expensive. The design I use results in “no waste”—if, of course, the cuts are accurate. I will come back to my studio very satisfied and will continue to buy not only my plywood from Home Depot, but also, the nuts, bolts, and tools I need in the future. This is, after all, what Home Depot wants…they don’t make money on the plywood or the labor involved in cutting it: they make their profit on the accessories and “add-ons”. A well managed store will bend over backwards to sell me a carriage bolt or better yet, a new jig-saw.

And the answer is…Don’t cheat…Take the poll first!

The right answer for increasing the perfection of your plywood cuts is the “lumber cart”. Why? For two reasons: 1): It makes the task of loading the panel saw much easier…turns a two person job into a one person job, and 2), the height of the cart is close to the height of the panel saw…makes loading easier and reduces the risk of damage.

Also note: It is advisable to load your plywood with the face of it to the back of the saw–because of the up-cut of the blade, less tear out will occur.

When all else fails…take a hike…

Like I said earlier, I’ve done this a lot…many of the lumber associates know me by name and don’t even question or challenge my approach. After all, I know their name, have submitted their name to corporate as “excellent customer service experience”…and as a result, the associates have been rewarded…they are pleased to see me knowing that I have the power to put bonuses in their pockets.

A simple script to perfection

Let air in and keep everything else out. That is all. Useful for when you need them and stylish for all the other times. Companies like WeatherTech and Husky Liners are obsessed with making sure that your window visors are a PERFECT fit on your vehicle. *we have all options.

Mud Flaps

Usually one of the first accessories for a driver who hates mud and dirt splashed up the side of their rig. Prevent rocks and other road debris from damaging the side of your vehicle with mud flaps. Again, WeatherTech, Husky Liners, and Bestop have every option under the sun when it comes to truck accessories like mud flaps.

Headlight Protection

Protect your costly headlights from scratches and cracks from road debris kicked back by other vehicles. WeatherTech has done the work to fit your specific headlights, now cover them up for with proper headlight protection that only takes a few minutes to install and will give you piece of mind while driving.

Choose a Size

Tailgate Size. These Cornhole boards always measure feet by feet and are intended for recreational use. They are lighter, making it easier to move them, and they usually cost less than regulation size boards do.

Regulation Size. For official Cornhole gameplay, opt for a regulation size set of boards that measure feet by feet.

The American Cornhole Organization (ACO) states in their official rules that boards must measure between 47.inches to 4inches long by 23.inches to 2inches wide.

Consider the Material

Official boards must be made of hardwood plywood; the minimum thickness of the surface of the board is ½-inch with a cross-section backing or – if there is no cross-section backing – is ¾-inch thick (according to the ACO rules).

The problem with wood boards is that they can be rather heavy, so if you want something a little lighter that you can store easily, opt for boards that have an aluminum frame.

 

 

 

 

How to save up to 86%? Here is little trick.

You must visit the page of sales. Here is the link. If you don’t care about which brand is better, then you can choose the cornhole boards by the price and buy from the one who will offer the greatest discount.

 

 

Final Word

First of all thanks for reading my article to the end! I hope you find my reviews listed here useful and that it allows you to make a proper comparison of what is best to fit your needs and budget. Don’t be afraid to try more than one product if your first pick doesn’t do the trick.

Most important, have fun and choose your cornhole boards wisely! Good luck!

So, TOP3 of cornhole boards

 

 

Questions? Leave a comment below!

Chatting about cornhole boards is my passion! Leave me a question in the comments, I answer each and every one and would love to get to know you better!



Leave a comment!

Let us know what you have to say:

RECENTLY REVIEWED
Best file cabinets of 2018
Best polishing compound of 2018
Best music stand of 2018
Best bakeware brand of 2018
Best flea collar for cats of 2018


AFFILIATE DISCLOSURE

Some posts may contain affiliate links. boss-reviews.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
FOLLOW US

       
 
COPYRIGHT © 2017 · boss-reviews.com · ALL RIGHTS RESERVED
DMCA.com Protection Status